Canon CN10x25 IAS S/E1 운영 매뉴얼 - 페이지 10

{카테고리_이름} Canon CN10x25 IAS S/E1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon CN10x25 IAS S/E1 34 페이지. Zoom lens

2 HOW TO MOUNT

2-1. MOUNT THE LENS ON THE CAMERA

For PL mount, read the following instructions before mounting the lens.

The PL mount supports /i communication, so make sure that the camera is set to "/i". Do not mount the lens if

the camera is set to a mount communication mode other than /i. Doing so could result in malfunction.

Before mounting the lens on the camera, make sure that the power of camera and the power of supply

equipment are turned off.

Before mounting the lens on the camera, make sure that the power of camera and the power of supply

equipment are turned off.

Lens

support

Screw supplied with the

lens support

Rods

Lens support fixing screws

　 Attach the lens to the camera tightly so that both mounting

surfaces are in complete contact.

NOTE

The mounting method differs depending on the

lens mounts. Refer to the operation manual for the

respective camera for the detailed information.

If the rod interferes with the lens body or drive unit

when mounting the lens, remove the rod and then

mount the lens.

　 Secure the lens holder on the lens support using the

clamping screw supplied with the lens support.

NOTE

When using a φ19 rod, attach the supplied attachment

holder to the lens holder in advance.

　Fix the lens support to the rods using lens support fixing

screws.