Cola DIANA CERAMICA 설치, 사용 및 유지 관리 매뉴얼 - 페이지 7

{카테고리_이름} Cola DIANA CERAMICA에 대한 설치, 사용 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cola DIANA CERAMICA 17 페이지. Woodburning cooker

페이지 인쇄

1.6 Reference standards

EN 12815: European standard for cookers fired by solid fuel, containing requirements for design, fabrication,

construction, safety and performance , instructions and markings, together with the relative homologation test

methods.

UNI 10683/98: standard specifying installation requirements for wood fired heating appliances and cookers,

including stoves with natural and forced draught with heat outputs < 35kW.

1.7 Dataplate

The dataplate is affixed to the rear of the cooker. It bears the following data:

model;

serial number;

type of fuel;

heat output;

max. consumption;

min. flue draught;

average flue temperature;

efficiency;

flue pipe size;

cooker external dimensions;

minimum safety clearance;

weight.

1.8 Instructions for ordering replacement parts

For the end-user:

Contact your service centre and/or dealer to order replacement parts.

For the dealer:

To order replacement parts, contact the Cola s.r.l. service centre and/or send a fax clearly specifying the

following information:

cooker model;

serial number;

date of purchase;

list of parts required;

details of any faults encountered.

- All work on components must be carried out by authorised and/or qualified personnel.

- Only use original Cola replacement parts.

1.9 Disposal of the cooker

For disposal, the cooker must be sealed inside strong packing; contact the local authority in charge of such

operations in order to proceed according to the current local regulations.

2 –TRANSPORT AND INSTALLATION

2.1 Packing, handling, shipment and transport

The cooker can be lifted using a lift truck, inserting the forks (of suitable length) in the openings provided in the

wooden pallet.

Make sure the equipment used for lifting and transport can support the weight of the stove, as specified on the

dataplate and in this manual.

Avoid taking the load in areas where it could be a danger if dropped.

Set the stove down on the floor carefully without jolting and position it in required place. Make sure the floor can

support the weight of the stove, otherwise consult a specialised technician.

In order to prevent possible damage, the plinths are supplied as separate parts which are to be assembled once

the cooker has been placed in the desired position.

DIANA