DOREMIDI FC-3 사용 설명서 - 페이지 3
{카테고리_이름} DOREMIDI FC-3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOREMIDI FC-3 8 페이지. Midi foot controller
페이지 인쇄
Consumption
USB HOST Output Power
USB HOST Compatibility
MIDI Compatibility
USB DEVICE Interface
DC In Interface
4. Steps for usage
1) Power supply: Use a 5V~12V DC power supply to supply power to the product through
the "DC IN", and the indicator lights up after power is supplied.
2) Configure the pedal's MIDI messages:
Connect the computer via USB DEVICE to configure the MIDI messages of the pedals.
For the configuration method, see 4. MIDI message configuration;
If not configured, default parameters are used:
Padal Name
MIDIChannel
1/-
2/Shift
3/+
4/EXP
3) Connect MIDI device/computer: Connect an external MIDI device/computer via USB
DEVICE/USB HOST/MIDI OUT.
4) Connect the expression pedal: Connect an analog expression pedal via a 6.35 TRS
cable.
5) Output MIDI messages: By pressing the footswitch/expression pedal, the configured
MIDI messages can be output.
The FC-3 can be configured with up to 16 sets of independent MIDI messages. Hold
down "Shift" and click "-"/"+" to switch to select different MIDI message numbers.
6)
Screen display description:
Switch Pedal Parameters
Expression Pedal Parameters
30mA@5V，20mA@9V
Maximum 2A@5V, depends on the input power of DC IN
Compatible with USB class compliant MIDI devices
Compatible with some known not USB class compliant MIDI
devices
Compatible with all musical instruments with MIDI standard interface,
compatible with all MIDI type messages
USB class compliant, plug and play
Powered by DC interface, 5V~12VDC
MIDI Status
1
PC
1
CC#64
1
PC
1
CC#11
MIDI Channel
One click plus 1
Press to send 127, release to send 0
One click minus 1
USB Device USB Host
USB: D H
PC
127
CH:1
CC#11
Value
0~127
MIDI Message Number
NO.：1
88
Remark
Sustain
pedal