Doug Fleenor Design DMX24DIM-2U 설치 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} Doug Fleenor Design DMX24DIM-2U에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doug Fleenor Design DMX24DIM-2U 5 페이지.

Maintenance and cleaning

The DMX24DIM or DMX24DIM-2U's fan intake on the front panel and the exhaust ports on the left

side of the enclosure should be cleaned periodically (see photos below). The frequency of cleaning

depends upon the working environment and the amount of time the dimmers are running.

Compressed air and a soft cloth should be used to remove excess dirt and lint. Power to the

DMX24DIM or DMX24DIM-2U must be disconnected while cleaning.

The fan in the DMX24DIM or DMX24DIM-2U will run any time any of the levels of any dimmer in the

pack is above 0%. The fan will continue to run for about 30 seconds after all dimmers are at zero.

Products manufactured by Doug Fleenor Design (DFD) carry a five-year parts and labor warranty

against manufacturing defects. It is the customer's responsibility to return the product to DFD at the

customer's expense. If covered under warranty, DFD will repair the unit and pay for return ground

shipping. If a trip is necessary to the customer's site to solve a problem, the expenses of the trip must

be paid by the customer.

This warranty covers manufacturing defects. It does not cover damage due to abuse, misuse,

negligence, accident, alteration, or repair by other than by Doug Fleenor Design.

Most non-warranty repairs are made for a fixed $50.00 fee, plus shipping.

Doug Fleenor Design, Inc.

396 Corbett Canyon Road

Arroyo Grande, CA 93420

(805) 481-9599 voice and FAX

(888) 4-DMX512 toll free (888) 436-9512

web site: http://www.dfd.com

Page 5 of 5