Doug Fleenor Design DMX24DIM-2U Installatie- en bedieningshandleiding - Pagina 5

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Doug Fleenor Design DMX24DIM-2U. Doug Fleenor Design DMX24DIM-2U 5 pagina's.

Pagina afdrukken

Maintenance and cleaning

The DMX24DIM or DMX24DIM-2U's fan intake on the front panel and the exhaust ports on the left
side of the enclosure should be cleaned periodically (see photos below). The frequency of cleaning
depends upon the working environment and the amount of time the dimmers are running.
Compressed air and a soft cloth should be used to remove excess dirt and lint. Power to the
DMX24DIM or DMX24DIM-2U must be disconnected while cleaning.

Fan operation

The fan in the DMX24DIM or DMX24DIM-2U will run any time any of the levels of any dimmer in the
pack is above 0%. The fan will continue to run for about 30 seconds after all dimmers are at zero.

Limited Manufacturer's Warranty

Products manufactured by Doug Fleenor Design (DFD) carry a five-year parts and labor warranty
against manufacturing defects. It is the customer's responsibility to return the product to DFD at the
customer's expense. If covered under warranty, DFD will repair the unit and pay for return ground
shipping. If a trip is necessary to the customer's site to solve a problem, the expenses of the trip must
be paid by the customer.
This warranty covers manufacturing defects. It does not cover damage due to abuse, misuse,
negligence, accident, alteration, or repair by other than by Doug Fleenor Design.
Most non-warranty repairs are made for a fixed $50.00 fee, plus shipping.
Doug Fleenor Design, Inc.
396 Corbett Canyon Road
Arroyo Grande, CA 93420
(805) 481-9599 voice and FAX
(888) 4-DMX512 toll free (888) 436-9512
web site: http://www.dfd.com
Page 5 of 5