Asus RT-G32 - Wireless Router 사용자 설명서 - 페이지 16

{카테고리_이름} Asus RT-G32 - Wireless Router에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus RT-G32 - Wireless Router 26 페이지. Broad range wireless family router
Asus RT-G32 - Wireless Router에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (13 페이지)

페이지 인쇄

Enable Port Trigger: Enable/Disable the port trigger.

Description: Enter the name of port trigger.

Trigger Port: This is the port used to trigger the application. It can be either a single port or a

range of ports.

(Trigger) Protocol: This is the protocol used to trigger the special application.

Incoming Port: This is the port number on the WAN side that will be used to access the

application. You may define a single port or a range of ports. You can use a comma to add

multiple ports or port ranges.

(Incoming) protocol: This is the protocol used for the special application.

Virtual Server

To make services, like WWW, FTP, provided by a server in your local network accessible to

the outside users, you should specify a local IP address to the server. Then, add the IP

address and network protocol type, port number, and name of the service in the following list.

Based on the list, the gateway will forward service request from outside users to the

corresponding local server.