Douglas Dynamics WESTERN IMPACT 설치 지침 매뉴얼 - 페이지 9
{카테고리_이름} Douglas Dynamics WESTERN IMPACT에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Douglas Dynamics WESTERN IMPACT 13 페이지. Utv straight blade angle, winch lift snowplow
페이지 인쇄
1. Remove jack stand wire-lock clevis pin. Fully raise
jack stand up. Insert pin in hole and engage wire
lock.
Jack
Stand
Lit. No. 87015, Rev. 00
ATTACHING YOUR SNOWPLOW
Connecting
Pin
Jack Stand
Wire-Lock
Clevis Pin
2. Remove cable-restraining wire-lock clevis pin.
Route winch cable/rope around pulley and secure
to lift pin. Re-insert clevis pin and engage wire
lock.
Cable-Restraining
Wire-Lock Clevis Pin
Pulley
Winch
Cable/Rope
3. Apply the supplied manual angle winch lift blade
attach/detach instruction label directly over the
current attach/detach label located on the back of
the blade. If the blade has no current label, place
the supplied label on the back of the blade in an
area that is visible during the attach and detach
procedure.
Thoroughly clean and dry the existing label or
blade surface area before applying the new label.
9
Lift Pin
May 15, 2021