Dahua VTH1550CH 빠른 설치 매뉴얼 - 페이지 10

{카테고리_이름} Dahua VTH1550CH에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua VTH1550CH 13 페이지. How to connect vto and vth
Dahua VTH1550CH에 대해서도 마찬가지입니다: 연결 매뉴얼 (16 페이지)

페이지 인쇄

VTH Monitor Configuration

For both the VTO and VTH to communicate, each unit must have the IP address details of the other unit. To add the VTO unit to the

VTH, select Network and input the VTO units IP address and set Enable Status to ON.

To add the VTH to the VTO, revisit the VTO web browser and go to System Config > Indoor Manager > Add. Input a family name, first

name and Nickname, these are purely for reference. Enter the VTH Short number This number must match the Room Number set in

the VTH Product Info page. For details on self password see page 11.

Click OK to confirm the setting.

Repeat the process for additional monitors, each time setting the monitor to a unique IP address and Room Number.

To program the module buttons, go to System Config > Local Config > Facade Layout. On the module images, click the relative

buttons to assign a specific apartment number to it.