Dahua VTH1550CH 빠른 설치 매뉴얼 - 페이지 9

{카테고리_이름} Dahua VTH1550CH에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua VTH1550CH 13 페이지. How to connect vto and vth
Dahua VTH1550CH에 대해서도 마찬가지입니다: 연결 매뉴얼 (16 페이지)

페이지 인쇄

VTH Monitor Configuration

To configure the VTH unit use the built in menu within the monitor itself, VTH units do not support web browser configuration.

Select Settings and input the engineer password: 002236 (default)

The Product Info menu is used to set the room number of the VTH and to configure the unit as a Master or Extension unit. When

configuring a modular system, each monitor will be configured as a Master.

In the Room No field input the room number, such as 1 for apartment 1.

Select Settings and then Project Settings, in the project settings menu select NetSet to configure the VTH network settings. When

configuring the network address of the VTH it is vital to ensure the IP address range is within the same Subnet as the VTO.

For both the VTO and VTH to communicate, each unit must have the IP address details of the other unit. To add the VTO unit to the

VTH, select Network and input the VTO units IP address and set Enable Status to ON.

Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com