Dahua VTH1550CH 빠른 설치 매뉴얼 - 페이지 4

{카테고리_이름} Dahua VTH1550CH에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua VTH1550CH 13 페이지. How to connect vto and vth
Dahua VTH1550CH에 대해서도 마찬가지입니다: 연결 매뉴얼 (16 페이지)

페이지 인쇄

VTH Configuration

(Continued)

In the project settings menu select NetSet to configure the VTH network settings. When configuring the network address of the VTH it

is vital to ensure the IP address range is within the same Subnet as the VTO.

For both the VTO and VTH to communicate, each unit must have the IP address details of the other unit. To add the VTO unit to the

VTH, select Network and input the VTO units IP address and set Enable Status to ON.

To add the VTH to the VTO, revisit the VTO web browser and go to System Config > Indoor Manager > Add. Input a family name, first

name and Nickname, these are purely for reference. Enter the VTH Short number. This number must match the Room Number set in

the VTH Product Info page.

Click OK to confirm the setting.

At the top of the VTH screen the

icon should disapear, this indicates that the VTO and VTH are now connected. To call the VTH

from the VTO, press the button on the VTO unit and press Answer to initiate two way communication.