Dahua VTH1550CH 빠른 설치 매뉴얼 - 페이지 5
{카테고리_이름} Dahua VTH1550CH에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua VTH1550CH 13 페이지. How to connect vto and vth
Dahua VTH1550CH에 대해서도 마찬가지입니다: 연결 매뉴얼 (16 페이지)
페이지 인쇄
Adding Additional VTH Units
When additional VTH units are to be added to the system, usually it is required that all VTH units are called by the VTO.
To enable this feature and configure the additional VTH units;
Login to the VTO web browser and go to System Config > LAN Config and tick the Group Call option.
Click OK then select Logout > Reboot
On the additional VTH unit, first configure the network address within the same range as both the VTO and existing VTH units.
Go to Project Settings > Product Info and select Master, this will change the VTH to Extension mode. Input the room number of the
master unit followed by -1, as an example if the room number is 1 enter 1-1 or 1-2, 1-3 etc for further additional units.
In the Master IP field enter the IP address of the main VTH unit.
Select OK to save the setting, the configuration is now complete.
5
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com