Advanced Axis AX-I/O-48 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Advanced Axis AX-I/O-48에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced Axis AX-I/O-48 20 페이지. Switch led modules

5 Switch LED Module Programming

Each Switch LED Module must be programmed for panel recognition and functionality utilizing the latest PC-NeT,

Field Configuration Programming.

The following is a quick reference guide on how to set up inputs (switches) and outputs (LEDs). It is not intended

as, nor does it come close to being, an exhaustive list of the available options associated with the Switch LED

Module programming capabilities.

Before the Switch LED Module can be programmed, it must be added to the PC-NeT like any other device/module.

Select the Switch LED Module type (Switch LED Card, IO Card, Red/Yellow LED Card, Red LED Card or Yellow

LED Card) under the Peripheral Bus, Device Selector, Peripheral Bus Interfaces of the Ax4-CTL-4 and double click

the associated peripheral bus address (26 thru 41 [module address 0 thru 15 respectively]). Correlation of the

switch LED module address is DIP switch address 0 = peripheral bus address 26, address 1 = peripheral bus

address 27, etc, etc, to address 15 equaling peripheral bus address 41.

Figure 12 shows an example of peripheral bus address 26 being allocated to a Switch LED Card (DIP switch

address 0), peripheral bus address 27 being allocated to an IO Card (DIP switch address 1), peripheral bus address

28 being allocated to a Red/Yellow LED Card (DIP switch address 2), peripheral bus address 29 being allocated to

a Red LED Card (DIP switch address 3) and peripheral bus address 30 being allocated to a Yellow LED Card (DIP

switch address 4).

www.advancedco.com

Figure 11 – AX-I/O-48 Switch Input / LED Driver Output Wiring