Draper 15225 사용 설명서 - 페이지 11

{카테고리_이름} Draper 15225에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 15225 16 페이지. 2000w 230v hot air gun
Draper 15225에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

BASIC HOT AIR GUN OPERATIONS

8.3 PAINT REMOVAL FROM WINDOW

FRAMES - FIG.3

IMPORTANT: Do not direct the hot air gun at the glass

during use as it may crack. Always use the glass

protection nozzle

hot nozzle.

8.4 HEATING AND SHAPING PLASTIC

TUBING - FIG.4

Fit the reflector hook nozzle

on to the low heat setting and, carefully heat the

tubing evenly moving it from side to side.

8.5 DEFROSTING WATER PIPES - FIG.5

IMPORTANT: Do not defrost plastic tubing/piping.

Fit the reflector hook nozzle

on to one of the lowest heat settings and, gently heat

the frozen area of the pipe starting from the edge of

the area and moving in towards the centre.

IMPORTANT: Take care not to heat the pipe too quickly

as this could cause the pipe to crack and burst. Do not

overheat water pipe joints as these are only soldered

together (max. 200ºC).

. Do not touch the glass with the

. Switch the hot air gun

FIG.3

FIG.5

FIG.4