Draper 15225 Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Draper 15225. Draper 15225 16 страниц. 2000w 230v
hot air gun
Также для Draper 15225: Руководство пользователя (16 страниц)
Печатать страницу
8.
BASIC HOT AIR GUN OPERATIONS
8.3 PAINT REMOVAL FROM WINDOW
FRAMES - FIG.3
IMPORTANT: Do not direct the hot air gun at the glass
during use as it may crack. Always use the glass
protection nozzle
hot nozzle.
8.4 HEATING AND SHAPING PLASTIC
TUBING - FIG.4
Fit the reflector hook nozzle
on to the low heat setting and, carefully heat the
tubing evenly moving it from side to side.
8.5 DEFROSTING WATER PIPES - FIG.5
IMPORTANT: Do not defrost plastic tubing/piping.
Fit the reflector hook nozzle
on to one of the lowest heat settings and, gently heat
the frozen area of the pipe starting from the edge of
the area and moving in towards the centre.
IMPORTANT: Take care not to heat the pipe too quickly
as this could cause the pipe to crack and burst. Do not
overheat water pipe joints as these are only soldered
together (max. 200ºC).
. Do not touch the glass with the
. Switch the hot air gun
. Switch the hot air gun
FIG.3
FIG.5
FIG.4
11