Draper 15225 Manual de instruções - Página 11

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Draper 15225. Draper 15225 16 páginas. 2000w 230v hot air gun
Também para Draper 15225: Manual do utilizador (16 páginas)

Imprimir página

BASIC HOT AIR GUN OPERATIONS

8.3 PAINT REMOVAL FROM WINDOW

FRAMES - FIG.3

IMPORTANT: Do not direct the hot air gun at the glass

during use as it may crack. Always use the glass

protection nozzle

hot nozzle.

8.4 HEATING AND SHAPING PLASTIC

TUBING - FIG.4

Fit the reflector hook nozzle

on to the low heat setting and, carefully heat the

tubing evenly moving it from side to side.

8.5 DEFROSTING WATER PIPES - FIG.5

IMPORTANT: Do not defrost plastic tubing/piping.

Fit the reflector hook nozzle

on to one of the lowest heat settings and, gently heat

the frozen area of the pipe starting from the edge of

the area and moving in towards the centre.

IMPORTANT: Take care not to heat the pipe too quickly

as this could cause the pipe to crack and burst. Do not

overheat water pipe joints as these are only soldered

together (max. 200ºC).

. Do not touch the glass with the

. Switch the hot air gun

FIG.3

FIG.5

FIG.4