ATI Audio System 10k 운영 및 유지보수 매뉴얼 - 페이지 3

{카테고리_이름} ATI Audio System 10k에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Audio System 10k 7 페이지. Modular amplifier rack system

to prevent background noise build-up during program pauses. Meter is

switchable to Output or Gain Reduction levels. Switchable linear amplifier mode.

IDA100

Independent 1X6 Distribution Amplifier--Individual trimmers are provided for each

output along with a Master Level control. Headphone output plus six transformer

coupled (IDA100-1) or active balanced (IDAI00-2) outputs.

MIDA100

Metered Independent Output Distribution Amplifier--Six Transformer (-I) or Active

Balanced (-2) outputs with independent level trim controls. An LED Bargraph

meter is switchable to monitor all outputs and the input. Includes Master Level

Control and headphone output.

MIDA100-1RC

Remote-controllable Distribution Amplifier--Four transformer outputs, each with

an independent level trim control. Switchable Remote or Local DC-operated VCA

Master Level Control. An LED bargraph meter is switchable to monitor all four

outputs or the input signal. Includes Headphone output.

PS100

Power Module--A bi-polar unregulated 18 VDC supply drives the system power

buss through fused isolation diodes. Operates singly or as a redundant pair in the

right hand positions of each RM100 rack frame. Front panel LEDs indicate low

voltage on either buss or blown fuses. Power Failure Alarm relay contacts close

for any power loss and can activate an external alarm. Alarm outputs from both

PS100 positions are paralleled and brought to a barrier block (terminals 4 & 5)

mounted on the left-hand rear of the card cage. Dual power transformers in each

module run cooler and generate minimal hum field. DC lines are fully bypassed.

AC line filtering, non-concentric wound power transformers and varistor clippers

suppress power line transients and RF feed-through.

ATI Audio Inc.

■ Tel: 856-626-3480

■

Fax: 856-504-0220

■

www.

audio.com