Andel FilterSepta 2 설치 및 운영 매뉴얼 - 페이지 9

{카테고리_이름} Andel FilterSepta 2에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andel FilterSepta 2 9 페이지.

Maintenance

Warning the BundGuard system feeding the FilterSepta, automatically starts

power to the unit should be isolated before opening the lid of the FilterSepta.

Wear protective clothing when carrying out the procedure below appropriate to the type

of oil/oils present.

Solvents and degreasers should not be used when carrying out maintenance as this will

affect the separation performance.

FilterSepta 2 units should be visually checked regularly to ensure there is no significant build-up of

contaminants and actioned appropriately. The FilterSepta 2 units should be cleared of contaminants on

regular intervals. This involves removal of any silt and oil build up as well as washing down of the

coalescing filter together with cleaning of the sensor probes. We recommend that they should be

maintained every 6 or 12 months – depending on the specific site.

EN858

Nominal Length

Nominal Width

Nominal Depth

Nominal Size

Nominal Flow Rate

Material

Internal Parts (Excluding sensor)

Filtration Type

Total Volume

Sludge Volume

Maximum Oil Storage

Max Oil layer

Weight Empty

Class 1

1200mm

500mm

824mm

3ltrs/s

HDPE

Coalescence Filter(removable)

300ltrs

100ltrs

70ltrs

150mm

54kg

Filtersepta 2 28.01.2022 Rev.0