Andel FilterSepta 2 Посібник з монтажу та експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Системи фільтрації води Andel FilterSepta 2. Andel FilterSepta 2 9 сторінок.

Друкувати сторінку

Maintenance

Warning the BundGuard system feeding the FilterSepta, automatically starts

power to the unit should be isolated before opening the lid of the FilterSepta.

Wear protective clothing when carrying out the procedure below appropriate to the type

of oil/oils present.

Solvents and degreasers should not be used when carrying out maintenance as this will

affect the separation performance.

FilterSepta 2 units should be visually checked regularly to ensure there is no significant build-up of

contaminants and actioned appropriately. The FilterSepta 2 units should be cleared of contaminants on

regular intervals. This involves removal of any silt and oil build up as well as washing down of the

coalescing filter together with cleaning of the sensor probes. We recommend that they should be

maintained every 6 or 12 months – depending on the specific site.

Technical Details

EN858

Nominal Length

Nominal Width

Nominal Depth

Nominal Size

Nominal Flow Rate

Material

Internal Parts (Excluding sensor)

Filtration Type

Total Volume

Sludge Volume

Maximum Oil Storage

Max Oil layer

Weight Empty

Class 1

1200mm

500mm

824mm

3ltrs/s

HDPE

Coalescence Filter(removable)

300ltrs

100ltrs

70ltrs

150mm

54kg

Filtersepta 2 28.01.2022 Rev.0