ATI Technologies QC-210 매뉴얼 - 페이지 7

{카테고리_이름} ATI Technologies QC-210에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies QC-210 17 페이지. Tool changer

Manual, Robotic Tool Changer Third Generation Teaching Aids

Document #9610-20-3370-02

2. Product Overview

Teaching Aids facilitate the programming of a robot to work with ATI Tool Changers. Without using fasteners

or special tools, Teaching Aids can reduce the time required to teach the robot to pick up and drop off customer

tooling and ensure optimal X, Y, and Z alignment. Teaching Aids help extend the life of the Tool Changer alignment

pins and bushings by reducing unnecessary wear. ATI Teaching Aids have high-contrast alignment marks to aid

the user in the set-up process. When positioned, the Master Side Teaching Aid and Tool Side Teaching Aid must

have a 1 mm clearance between them. This distance ensures the No-Touch Locking zone for the Tool Changer is

set correctly. Refer to the drawings in

video that demonstrates how to use ATI's Teaching Aids for robotic Tool Changers:

video_listing.aspx.

The Master Side Teaching Aid is a red, aluminum body. The interior bore fits over the Tool Changer locking

mechanism. Alignment holes are custom fitted for ATI Tool Changer alignment pins. Unlike the first

generation of Teaching Aids, the Tool Changer Master plate locking mechanism can be locked or unlocked,

when installing the Teaching Aid to the Master plate. Magnets secure the Teaching Aid to the flange of the

Master plate male coupling.

(2) Hole for

Alignment Pin

in the Master plate

Notch(s) for

Alignment

Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: 919.772.0115 • Fax: 919.772.8259 •

Section 8—Drawings

Figure 2.1—Master Side Teaching Aid (QC-210 Shown)

Master Side Teaching Aid

(QC-210 Shown)

for more information. The following is a hyperlink to a

(3) Magnets

Label with directions.

www.ati-ia.com

http://www.ati-ia.com/library/

Label with Part Number

and Flat A designation

• Email: