Electrolux AOFP101U 매뉴얼 - 페이지 5

{카테고리_이름} Electrolux AOFP101U에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux AOFP101U 11 페이지. Bcf 30kg 6 gn1/1 lw (240/3/60hz), bcf 50kg 10 gn1/1 lw (240/3/60hz) / bcf 100kg 20 gn1/1 lw (240/3/60hz) / bcf 70kg 10 gn2/1 lw (240/3/60hz) / bcf 180kg 20 gn2/1 lw (240/3/60hz) / bcf 30kg 6 gn1/1 lw (208/3/60hz) / bcf 50kg 10 gn1/1 lw (208/3/60hz) / bcf
Electrolux AOFP101U에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (27 페이지)

페이지 인쇄

FIG.2

FIG.3

FIG.4

FIG.5

B.1.2.1 Removing the packaging and handling

Cut the straps and remove the protective film, taking care not to

scratch the sheet metal if scissors or blades are used. Remove

the cardboad top, the polystyrene corners and the vertical

protection pieces. For appliances with stainless-steel cabinets,

carefully remove the protective film without tearing it, to avoid

leaving glue stuck to the surface.

Should this happen, remove the traces of glue with a non-

corrosive solvent, rinsing it off and drying carefully. It is advisable

to go over all the stainless steel surfaces with a cloth coated with

vaseline oil, in order to form a protective film. Use a pallet-jack

or fork-lift truck to lift appliances. Inserting the forks under the

pallet, lift the appliance and carry it to the place of installation,

making sure that the load is balanced. Remove the equipment

from the wooden pallet, move it to one side, then slide it onto the

floor.

FIG.6

FIG.7

FIG.8