Electrolux AOFP101U 매뉴얼 - 페이지 8

{카테고리_이름} Electrolux AOFP101U에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux AOFP101U 11 페이지. Bcf 30kg 6 gn1/1 lw (240/3/60hz), bcf 50kg 10 gn1/1 lw (240/3/60hz) / bcf 100kg 20 gn1/1 lw (240/3/60hz) / bcf 70kg 10 gn2/1 lw (240/3/60hz) / bcf 180kg 20 gn2/1 lw (240/3/60hz) / bcf 30kg 6 gn1/1 lw (208/3/60hz) / bcf 50kg 10 gn1/1 lw (208/3/60hz) / bcf
Electrolux AOFP101U에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (27 페이지)

페이지 인쇄

- fit the oven to the top of the chiller (see picture "C")

- take the 3 supports and fit them into place (see picture "D")

Note: When installing the oven on top of the chiller, refer to the

instructions in the oven handbook.

Caution: If the chiller has a top, remove it by following the

instructions in section B.1.3.4. The stacking kit code number for

"Cook&Chill" is F881011.

B.1.3.4 Positioning the top

If the AOFP061U chiller is not to be stacked on the "Cook&Chill"

unit, order and fit the top kit (code F880027).

To fit the top, follow the instructions given below, making

reference to the steps illustrated

- take the hinge and fit it to the top of the chiller, externally on the

left, using the supplied M5X12 screws (see picture "A")

- position the polysterol cover (see picture "B")

- position the top and secure it on the front with two M5x12

screws, using the mounting holes on the crosspiece and door

bracket, and on the back with four M2x19 (see picture "C")