Andonstar AD206S 사용자 설명서 - 페이지 6

{카테고리_이름} Andonstar AD206S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andonstar AD206S 11 페이지.

3. The another clip is installed in the same way.

*Install main device: Loosen the small thumbscrews on the optical bracket. Then slide the optical stack

in to the ring of the optical bracket. Finally tighten the thumbscrews to hold the optical stack in place.

If done correctly,

but also freely adjust the monitor,

rest of microscope remains in place.

*Connect the power supply: connect the microscope and the power supply with the switch cable. (See

Figure 6)

you should be able to not just turn the focus controller of the optical stack freely,

the angle between the base and the optical bracket,

If you have any question or problem for assembly,

so you won't damage the device during assembly.

（ Figure 6 Connect ）

（ Figure7 Remote buttons ）

while the

please