Bose 802 C II 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Bose 802 C II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose 802 C II 22 페이지. System controllers
Bose 802 C II에 대해서도 마찬가지입니다: 서비스 매뉴얼 (20 페이지), 서비스 매뉴얼 (23 페이지)

페이지 인쇄

Figure 25

Positioning and securing the external harness.

5. Remove the lock nut and washer from the

internal protection circuit harness (Figure 5a).

Set them safely aside.

6. Thread the internal harness through the rear

panel. Insert the small white connector first. The

wire end of the harness should now be inside

the controller.

7. Turn the barrel connector so the flat side

matches the flat side of the hole on the

controller. The connector should sit firmly

against the outside of the rear panel (Figure

5b).

8. Replace the lock nut and washer on the internal

harness INSIDE the rear panel. Tighten firmly

with needle nose pliers (Figure 5c).