Alert 450R 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Alert 450R에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alert 450R 14 페이지. Remote starter system

REMOTE START OPERATION

C.TO TURN OFF THE REMOTE STARTER:

When the engine is running in (Remote Start Mode), if you want shut

down the engine:

1. Press the

button twice on the transmitter, the engine will shut off.

2. Move the optional remote starter enable toggle switch to the OFF

position. (If installed)

3. Press the brake pedal. The engine will shut down and the parking lights

will turn off to indicate engine has shut down.

D. TO OPERATE THE VEHICLE WHILE RUNNING ON THE REMOTE

START:

To operate the vehicle while running in Remote Start Mode.

1. Insert the ignition key into the ignition switch and turn it to the ON

(not the start) position.

2. Press the brake pedal.

Note: If the brake pedal is pressed before the key is in the ON

position, the engine will shut off.

E. PIT STOP FEATURE:

This feature allows the vehicle to remain running after the key has been

removed from the ignition switch. This feature is useful for occasions when

you wish to exit and lock the vehicle for short periods of time, but would

like to leave the engine running and the Heater/AC control on.

1. Before turning off the engine, press the

and the LED indicator will flash 3 times to confirm it has been entered.

2. Turn the ignition key to the OFF position. (The engine will stay running.)

3. The engine will remain running until the pre-programmed time elapsed

or a shutdown input is received.

F. TURBO COOL-DOWN TIMER MODE:

Turbo Cool Down timer mode keeps the engine running after arriving at you

destination for a programmable period of 1/ 3 or 5 minutes, This allows the

systems time to conveniently cool down the turbo after you have left the

vehicle. The time setting is programmed by the installer.

To activate:

1. While the engine is running, place the transmission in the park position

and apply the emergency brake.

button twice on the transmitter