Bose Acoustimass 6 Series III 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Bose Acoustimass 6 Series III에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass 6 Series III 23 페이지. Home theater speaker sytem
Bose Acoustimass 6 Series III에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 빠른 설정 매뉴얼 (1 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (25 페이지)
페이지 인쇄
= I\lever connect the cube speakers direct/y to a receiver output. Always connect
e powered AcouslirnassO module, then connect the module to the receiver.
Never use broken or frayed wiring, which can result in electrical shock or damage
to your system. The supplied cables are not intended for in-wall installafion. Check local
building codes or enlist a qualified insfaIler.
Cube speaker connections
to Rcousfimass module
8
Connecting the speakers
A
CAUTION: Never connect the cube speakers directly to a receiver output. Always connect
them to the powered AcoustimasEf& module, then connect the module to the receiver.
A
CAUTiON: Never use broken
or
frayed wiring, which can result in electrical shock
or
damage
to your system. The supplied cables are not intended for in-wall installation. Check local
building codes or enlist a qualified installer.
Connecting front
speakers
to
the Acoustimass module
Three individual 20-foot (6.1 m) speaker cables connect the center, right, and left front cube
speakers to the Acoustimass module (Figure 5). Be sure to match the correct cable with the
corresponding speaker location. Front speaker cables have blue RCA connectors at one end
with l (left), R (right), or C (center) molded into the connectors. The other ends of the cables
have two wires. The red collars on the
+
wire are labeled lEFT, RIGHT, or CENTER.
Cube speaker connections
to Acoustimass module
8
RIGHT
REAR
LEFT
LEFT
REAR