DROPSA 989004 사용자 및 유지보수 매뉴얼 - 페이지 2

{카테고리_이름} DROPSA 989004에 대한 사용자 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 989004 14 페이지.

페이지 인쇄

1. INTRODUCTION

This user's and maintenance manual refers to a 989 pump series for grease.

It is recommended that this manual is carefully kept in good condition and is always available to persons requiring to

consult it.

To request further copies, updates or clarifications with respect to this manual contact the Engineering Department at

Dropsa SpA.

The use of the pump referred to in this manual must be entrusted to qualified personnel with a knowledge of

hydraulics and electrical systems.

The manufacturer reserves the right to update the product and/or the user's manual without the obligation to revise

previous versions. It is however, possible to contact the Engineering Department for the latest revision in use.

The pump, and any accessories mounted on it, should be carefully checked immediately on receipt and in the event of

any discrepancy or complaint the Dropsa SpA Sales Department should be contacted without delay.

DROPSA S.p.A. declines to accept any responsibility for injuries to persons or damage to property in the event of the

non-observance of the information presented in this manual.

Any modification to component parts of the system or the different destination of use of this system or its parts

without prior written authorization from DROPSA S.p.A. will absolve the latter from any responsibility for injury or

damage to persons and/or property and will release them from all obligations arising from the guarantee.

2. GENERAL DESCRIPTION

The features which distinguish this pump are:

 high performance,

 simplicity of construction,

 modularity,

The simplicity of construction guarantees long life, reliability and simplified and reduced maintenance. The modularity

of the components allows the system engineer to construct the lubrication unit to meet the specific needs of the

lubrication system it is serving.

3. PRODUCT MACHINE IDENTIFICATION

Machine identification yellow label is located on the front side of the reservoir and contains product serial number,

input voltage and details of the operating parameters.

4. TECHNICAL SPECIFICATIONS

Pressure

Fixed delivery max (pumping Ø6 mm)

Fixed delivery max (pumping Ø8 mm)

Adjustable delivery max (pumping Ø6 mm)

No. pumpings

Capacity reservoir

Lubricant

Lubricant Viscosity

Working Temperature

Motor Voltage

Power absorption

TECHNICAL CHARACTERISTICS

1,4-10 cm

2,5-17 cm

300 Bar ( 4410 psi)

10 cm

/ min (0.55 cu. in/min)

17 cm

/ min (1.03 cu. in/min)

/ min (0.085 - 0.61 cu. in/min)

/ min (0.15 - 1.03 cu. in/min)

1 ÷ 3

5 kg. (11 lb)

Grease

000 ÷ 2 NLGI

+ 10° C ÷ + 40° C (+50° ÷ +104° F)

220/380 V – 50/60 Hz

90 W