Anolis ArcPower 72/K2 사용자 설명서 - 페이지 8

{카테고리_이름} Anolis ArcPower 72/K2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anolis ArcPower 72/K2 20 페이지.

5.2.Master-slave operating

1.Unplug from the mains before installation.

2.Connect the LED modules to the fixtures.

3.Connect the DMX output of the master fixture in the data-chain with the DMX input of the first slave. Always

connect output with the input of the next slave until all slaves are connected.Up to 32 fixtures can be connected

in master/slave chain

4.Insert the termination plug (with 120 Ohm) into DMX input of the master fixture and into the DMX output of

the last slave fixture in the link in order to ensure proper transmission on the data link.

5.Connect the fixtures to the mains.

6.Check the current limit setting "C.Li" in menu "SPE" (see chapter "8.6 Special functions").

7.See chapter "Stand-alone mode" in order to set the fixture as a master or slave.