DSC PowerSeries 제품 요약 시트 - 페이지 10

{카테고리_이름} DSC PowerSeries에 대한 제품 요약 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC PowerSeries 20 페이지. Telephone interface & automation control module
DSC PowerSeries에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄
DSC PowerSeries 제품 요약 시트
Step 2 – Schedule [02] Programming – Escort Section [033] to [035]
Schedule [02] will be used for the Night Occupancy Setting (starting at 11:00 pm) and will be programmed
as follows:
•
Program data [2300] in Section [033] (11:00 pm On Time)
•
Program data [9999] in Section [034] (no Off Time is required)
•
Turn Options [01] through [07] ON in Section [035] to enable all days of the week.
Step 3 – Thermostat 1 Options – Escort Section [800]
•
Turn Option [01] ON to enable the thermostat.
•
Turn Option [02] ON if an EMS-OTS outdoor temperature sensor is connected.
•
Turn Option [03] ON if the thermostat will be used to control heating.
•
Turn Option [04] ON if the thermostat will be used to control cooling.
•
Turn Option [05] ON so the Day Occupancy Setting will always activate by schedule.
•
Turn Option [06] ON so the Night Occupancy Setting will always activate by schedule.
•
Turn Option [07] and [08] OFF as the Away and Auxiliary Occupancy Settings are not being used.
Step 4 – Thermostat 1 Day Occupancy Setting Schedule Assignment – Escort Section [801]
Turn Option [01] ON for the Day Occupancy Setting to follow Schedule [01].
Step 5 – Thermostat 1 Day Occupancy Setting Output Option – Escort Section [803]
Program data [02] for schedule control only. The user will always have manual control as well.
Step 6 – Thermostat 1 Night Occupancy Setting Schedule Assignment – Escort Section [806]
Turn Option [02] ON for the Night Occupancy Setting to follow Schedule [02].
Step 7 – Thermostat 1 Night Occupancy Setting Output Option – Escort Section [808]
Program data [02] for schedule control only. The user will always have manual control as well.
Operation:
At 8:00 am, every day, the Escort will adjust the temperature to the value programmed
for theDay Occupancy Setting and at 11:00 pm the Escort will adjust the temperature to the value
programmed for the Night Occupancy Setting.