DSC PowerSeries 제품 요약 시트 - 페이지 8

{카테고리_이름} DSC PowerSeries에 대한 제품 요약 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC PowerSeries 20 페이지. Telephone interface & automation control module
DSC PowerSeries에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄

Step 3 - Thermostat 1 Day Occupancy Setting PGM Output – Escort Section [804]

Program data [03]. The Escort will adjust the temperature to the value programmed for the Day Occupancy

Setting when PGM Output [03] is activated by the panel.

Step 4 – Thermostat 1 Night Occupancy Setting Output Option – Escort Section [808]

Program data [01] for output control only. The user will always have manual control as well.

Step 5 - Thermostat 1 Night Occupancy Setting PGM Output – Escort Section [809]

Program data [05]. The Escort will adjust the temperature to the value programmed for the Night

Occupancy Setting when PGM Output [05] is activated by the panel.

Step 6 – Thermostat 1 Away Occupancy Setting Output Option – Escort Section [818]

Program data [01] for output control only. The user will always have manual control as well.

Step 7 - Thermostat 1 Away Occupancy Setting PGM Output – Escort Section [819]

Program data [04]. The Escort will adjust the temperature to the value programmed for the Away

Occupancy Setting when PGM Output [04] is activated by the panel.

Step 8 – PGM Output 03 to 10 Programming – Panel Section [010], [143]

Three different outputs are needed; stay arm, away arm and disarm. To get an output to activate for disarm

status, we must 'invert' an output programmed for armed status.

Section [010] - Program the following:

PGM 03

PGM 04

PGM 05

Section [143] – Program the following:

Turn Option [1] ON

Turn Option [2] ON

Turn Option [3] OFF

Operation:

When the panel is armed in the 'stay' setting, the panel will activate PGM Output [05]

and the Escort will adjust the temperature to the value programmed for the Night

Occupancy Setting. When the panel is armed in the away setting, the panel will activate

PGM Output [04] and the Escort will adjust the temperature to the value programmed for

the Away Occupancy Setting. When the panel is disarmed, the panel will activate PGM

Output [03], and the Escort will adjust the temperature to the value programmed for the

Day Occupancy Setting.

data [05]

data [05] for 'Armed Status'

data [17]

data [17] for 'Away Arm'

data [18]

data [18] for 'Stay Arm'

enable partition 1

enable partition 2

will 'invert' the output – instead of activating when

the panel is armed, the output will activate when the

panel is disarmed.