DSC HS2LCDWF v1.0 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} DSC HS2LCDWF v1.0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC HS2LCDWF v1.0 9 페이지. Wireless keypad

페이지 인쇄

3. Place the adaptor plug in the housing indentation, perpendicular to the key-

pad. Insert the adaptor plug firmly into the jack.

4. Pivot the adaptor plug downwards so that it fits flush with the housing.

Guide the AC wire along the channel provided in the keypad housing; the

wire will extend through the bottom of the housing.

5. Replace the keypad on the mounting plate/desk stand (in the latter case, a

further channel is provided in the bottom of the desk stand. Guide the AC

wire along this channel; the wire will extend through an opening in the back

of the stand).

6. Plug the adaptor into a wall outlet.

NOTE: Only use the power adaptor (9.0VDC, 1.25A, 11.25W) supplied with the kit.

CAUTION: The socket-outlet in which the direct plug-in adaptor is inserted must be

close to the keypad and easily accessible. Never obstruct the access to the socket out-

let. The plug of the adaptor serves as a means of disconnection from the supply mains.

Programming Labels

1. Use this section to assign a meaningful name (e.g., Front Door, Hallway,

etc.) to each zone.

2. Enter Keypad Programming by pressing

3. Enter the 3-digit section number for the label to be programmed.

4. Use the arrow keys (<>) to move the cursor underneath the letter to be

changed.

5. Press number key 1 through 9, corresponding to the letter you require. For

example, pressing number key 2 once will display the letter D; pressing it

again will display the letter E; pressing it a third time will display the letter

F, and so on.

[1] - A, B, C, 1 [4] - J, K, L, 4 [7] - S, T, U, 7 [0] - Space

[2] - D, E, F, 2 [5] - M, N, O, 5 [8] - V, W, X, 8 [*] - Select

[3] - G, H, I, 3 [6] - P, Q, R, 6 [9] - Y, Z, 9,0 [#] - Escape

6. When the required letter or number is displayed use the arrow keys (<>) to

scroll to the next letter.

7. When you are finished programming the Zone Label, press [

'Save' and press [

] again.

8. Repeat Steps 3 through 7 until all Labels are programmed.

ASCII Characters

Label Library

The Label Library is a database of words commonly used when programming labels.

Individual words can be combined as needed. e.g., Front + Door. Each line of the dis-

play supports a maximum of 14 characters. If a word will not fit on a line, scroll right

until the cursor appears at the first character of the second line then add the word.

To program a custom label using the Label Library:

[

,][8][Installer Code][,].

]. Scroll to

1. Enter keypad programming and select the label to change. e.g.,

[*][8][Installer Code][000][001] (to program the label for zone 01).

2. Press [*] to open the "Select Options" menu.

3. Press [*] again to select the "Words" option.

4. Enter the 3-digit number corresponding to a word (see Words table below)

or use the scroll keys [<][>] to view words in the library.

5. Press [*] to select the word.

6. To add another word, repeat the above procedure from step 2.

7. To add a space, press the right scroll key [>].

8. To clear characters, select "Clear to End" or "Clear Display" from the

"Select Options" menu.

9. To save the current label, press [*] to access the "Select Options" menu,

scroll left [<] to "Save" then press [*] again.

Broadcasting LCD Labels

If more than one LCD keypad is present on the system, labels programmed at

one keypad will be broadcast to all other LCD keypads right after the change is

confirmed.

Voice Prompt/Voice Chime

Voice Prompt Control (for wireless keypads only)

Menu: [*][6][access code] > Voice Control > Voice Prompt

Keypad: [*][6][access code]

This function is used to change the volume level of keypad voice prompts, for

example, "User arming in progress." The voice prompt speaks the zone labels

programmed for zone openings/closings. Use the scroll keys (LCD/touchscreen

keypads) or the [*] key (LED/ICON keypads) to increase and decrease volume

or enter a value from 00 to 15. Selecting 00 turns off keypad voice prompts.

Voice Chime Control

Menu: [*][6][access code] > > Voice Control > Chime Control

Keypad: [*][6][access code]

This function is used to change the keypad voice chime volume level. Use the

scroll keys (LCD/touchscreen keypads) or the [*] key (LED/ICON keypads) to

increase and decrease voice chime volume or enter a value from 00 to 15.

Selecting 00 turns off voice chime.

NOTE: This feature is only available when the voice prompt feature is enabled.

Changing Brightness/Contrast/Buzzer/

LCD Keypads

1. Press [,][6][Master Code].

2. Use the [<][>] keys to scroll to either Brightness/LED Bar Control, Contrast Con-

trol, Buzzer Control, or Voice Control.

3. Press [,] to select the setting you want to adjust.

4. a) Brightness/LED Bar Control: There are 15 backlighting levels. Use the [<][>]

keys to scroll to the desired level. Changing this level adjusts the LED bar accord-

ingly.

b) Contrast Control: There are 15 different display contrast levels. Use the [<][>]

keys to scroll to the desired contrast level.