ATV VD650WDR 사용 설명서 - 페이지 10

{카테고리_이름} ATV VD650WDR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATV VD650WDR 18 페이지.

페이지 인쇄
ATV VD650WDR 사용 설명서
 excessive lighting compensation is performed when the weighting on the
high-brightness side is increased.
4) Auto(Auto Weighting BLC) : Auto weighting BLC on.
5) Spot(User Setting BLC area) : Spot metering mode on.
 Posi : OSD mode to adjust the position of the spot metering area.
 Size : OSD mode to adjust the size of the spot metering area.
6) Zone(Preset BLC area) : Fixed metering area mode. (1-9).
<Mask>
1) Mask: Select mask area(1-15).
2) Func: Select mask function.(Privacy, BLM, Both, Off).
 Privacy : Area to screen on the display.
 BLM : Back Light Mask.
Selected BL Mask area that will be except of the auto exposure
If there is a high light installed in a limited environment such as an
apartment parking garage or gas station entrance, removing the high light
makes it possible to view car license plates efficiently.
 Both : Privacy function and BLM function on.
 Off : Function off.
3) Edit : Mask area edit.
 Edit mode take effect during Func not Off.
Size : adjust the size of the Privacy and BLM mask area.
Posi : adjust the position of the Privacy and BLM mask area.
Tilt : adjust tilting of Privacy and BLM mask area.
Color: Select Privacy and BLM mask (0-14).
Transparency: Select Privacy mask transparency (Default 3/0-3).
Mosaic: Select Privacy and BLM mask mosaic On/Off
Adj. Mosaic: Adjust Privacy and BLM mask mosaic level (0-31).
<Detection>
 Func : Detection function selection.
 Sens Down : Adjust to Motion Sensitivity using left/right Buttons.
1) OFF : Detection function off.
2) Zone : Area motion detection mode.
 Zone : Select Motion detection zone (Zone1-4).
 Func : Select Motion detection on/off.
 Size : Press Enter button to adjust the size of the Motion detection area.
 Posi : Press Enter button to adjust the position of the Motion detection area.
 Link Zoom : Select Motion detection with D-PTZ function that On/Off .
When the motion triggered in the area, move to the area with D-PTZ.
3) Motion Trace : Motion trace mode on.
 Tracks an object through a scene and generates an alarm.
4) Face Trace : Face Trace mode on.
 Tracks face through a scene and generates an alarm.
 Sens Down : lower value is more widen the scope to judge face. (0~127)
 Min Size : Minimum face size configuration (0 : minimum face size is to none)
10