AnyLoadg P1 사용자 설명서 - 페이지 2
{카테고리_이름} AnyLoadg P1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyLoadg P1 8 페이지. Weighing indicator
페이지 인쇄About This Manual
This Manual is intended for use by service technicians responsible for
installing and servicing 110ES-WL wireless scale and P1 weighing
indicator.
CAUTION
1. Don't make lifts beyond rated
capacity of the scale
2. The scale must be checked for
operation routinely. Don't operate
if hook, shackle, sling, cable, etc
show any sign of defects or
excessive wear.
3. Avoid bump, keep the scale and
the indicator away from corrosive
liquid or environment.
4. If the scale is not going to be
operated for a long time, please
turn off the scale and indicator,
1. Introduction
The indicator front panel consists of a LCD display and keyboard the
indicator comes up with a substantial and durable ABS indicator
suitcase.
1.1 Standard Features
∑- A/D conversion
technology.
Keyboard calibration, simple
operation.
Weighing data save protection
in case of power off.
Battery charger with several
protection modes to extend life of
rechargeable battery.
Portable design, hand-hold,
easy to operate outdoor.
W
recharging the battery every two
months to preserve the life-span
of the battery and recharge it
before operation
5. When indicator displays low
battery, do not turn on the crane
scale. Please recharge the battery
first before turn on the scale.
6. Most procedures described in
this manual are to be performed
by qualified service personnel
only.
LCD display with backlight.
Standard parallel print
interface(EPSON printer).
Rechargeable 7.2V/2.8AH
battery for indicator. Scale body
with power supply of
4*RCR123A batteries.
Power saving mode, indicator
will turn off automatically after
30minutes without operation.
> D
^ t> W