Duerkopp Adler 550-12-12 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Duerkopp Adler 550-12-12에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 550-12-12 6 페이지.
Duerkopp Adler 550-12-12에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지)

페이지 인쇄

1. Scope of Delivery

2. Installing the Sewing Unit

2.1 Setting the Work Height

Basic equipment consists of:

–

Complete sewing machine for advance crimping

–

Frame MG53-3 with pallet table top 1530 x 951 mm

–

Multi-program controls 200-3

–

Direct current positioning drive

–

Compressed Air Maintenance Unit

–

Sewing light

–

Thread stand

–

Tools and small parts in the accessories pack

Optional equipment Bordering (special order)

ATTENTION !

The sewing unit may only be set up by trained skilled personnel.

Before installing the sewing unit it is essential that all transport

security be removed !

The work height is adjustable between 75 cm and 85 cm (measured to

the top of the table).

–

Loosen the set screws 1 on both sides of the frame.

–

Horizontally set the work pkate to the desired height.

In order to avoid tilting pull out or push in the work plate equally on

both sides.

–

Tighten the set screws 1 again.