Duerkopp Adler 550-12-12 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Duerkopp Adler 550-12-12에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 550-12-12 6 페이지.
Duerkopp Adler 550-12-12에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지)

페이지 인쇄

2.2 Mounting the Thread Stand

2.3 Checking the V-belt Tension

Mount the thread stand on the table top as shown in the sketch above.

After transport the V-belt tension set at the factory is to be checked.

The V-belt 1 must be so tensioned that it can be pressed in at the

center by about 10 mm under finger pressure.

Correcting V-belt tension:

–

Loosen the nuts 2.

–

Swing the sewing drive 3 until the desired V-belt tension is

reached.

–

Tighten the nuts 2 again.