Duerkopp Adler 550-767 설치 지침 매뉴얼 - 페이지 15

{카테고리_이름} Duerkopp Adler 550-767에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 550-767 18 페이지. Engineered work station for side airbag tearing seam
Duerkopp Adler 550-767에 대해서도 마찬가지입니다: 피팅 지침 (2 페이지)

페이지 인쇄

Lubrication

5.1 Topping up with oil

5.2 Adjusting hook lubrication

Top up the oil reservoir using DA-10 lubricating oil or only or an

equivalent oil with the following specification:

–

Viscosity at 40°C:

–

Flashpoint:

DA-10 is available from DÜRKOPP ADLER AG retail outlets

(see operating instructions).

–

Unscrew the oil-filler cap 2 and top up with oil.

–

Check the oil level at sight glass 1.

The oil level must be between " EMPTY " und " FULL".

–

Replace the oil-filler cap 2.

Remove any oil which has overflowed into the oil collector.

CAUTION:

In order to ensure that the hook is properly lubricated during the

running-in period, a relatively large quantity of oil is set prior to

despatch.

This setting should be checked and adjusted after the running-in

period.

See also the Operating or Service instructions.

10 mm

150 °C