Anzzi SB-AZ009WC 설치 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Anzzi SB-AZ009WC에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anzzi SB-AZ009WC 14 페이지. Shower base
Anzzi SB-AZ009WC에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (8 페이지)

페이지 인쇄

STEP 5

Apply a generous amount of mortar that

●

has been mixed to a thick consistency.

Place the base in the wet mortar, adjust

until it is level, and let mortar cure for

24 hours. Proceed to the next step. (Fig 5)

STEP 6

It is recommended not to stand in base

●

while securing to wall. Set base in corner

and press it into mortar.

Secure flanges to all studs with #8(1-1/2")

screws through previously drilled holes.

(Fig 6)

IMPORTANT: Gaps between flanges and

studs must be less than 1/8". Insert shims

to fill gaps if needed.

Mortar

Fig. 5

Shim

Fig. 6