Addictive Desert Designs ADD-Lander 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Addictive Desert Designs ADD-Lander에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Addictive Desert Designs ADD-Lander 5 페이지. 2005-current toyota tacoma overland rack
Addictive Desert Designs ADD-Lander에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지)

페이지 인쇄

ADDICTIVE DESERT DESIGNS® ®

ADDICTIVE DESERT DESIGNS

5. Tighten the front facing bolts on the front cross member to 30 foot pounds. You may to move the chase rack

as far back as you can to access the front of the bolt heads. (Fig E) Leave the rest of the cross member bolts

loose for now.

Tighten these two bolts before

tightening the 1/2" mounting bolts,

but do not tighten any other cross

member bolts.

Fig E

6. Tighten the 1/2" Mounting Bolts to 57 foot pounds.

7. Tighten the remaining 3/8" Mounting Bolts to 30 foot pounds.

8. Stand back and enjoy your new ADD-Lander™ Overland Chase Rack.

9. Check and re-tighten, if needed, all mounting bolts after 100 miles and periodically thereafter.

Addictive Desert Designs® | Page 4

2020-Current Jeep Gladiator JT ADD-Lander™

Overland Rack Installation Instructions