Danfoss ECL Comfort 110 사용자 설명서, 설치 및 유지보수 - 페이지 13
{카테고리_이름} Danfoss ECL Comfort 110에 대한 사용자 설명서, 설치 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss ECL Comfort 110 19 페이지. Application 130
Danfoss ECL Comfort 110에 대해서도 마찬가지입니다: 데이터시트 (8 페이지), 설치 매뉴얼 (8 페이지), 마운팅 매뉴얼 (8 페이지), 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지)
페이지 인쇄
Installation
Mounting the ECL Comfort controller
For easy access, you should mount the ECL Comfort controller near the system. Select
one of the three following methods:
•
Mounting on a wall
•
Mounting on a DIN rail
•
Mounting in a panel
Screws and rawlplugs are not supplied.
Mounting on a wall
Mount the controller on a wall with a smooth surface and establish the electrical
connections.
Mounting on a DIN rail
Mount the controller on the DIN rail and establish the electrical connections.
Mounting in a panel
Mounting kit: Order code no. 087B1249.
The panel plate thickness must not exceed 5 mm. Prepare a cut-out with the dimensions
93 x 139 mm. Insert the controller into the panel cut-out and fix it with the clamp which
is placed horisontally on the controller. Establish the electrical connections.
For further details on mounting, see the mounting guide.
24
VI.KT.F2.02
© Danfoss 06/2008
DH-SMT/DK
Electrical connections - 230 V a.c. - in general
* Optional connections for safety thermostat
Terminal
Description
20
Supply voltage 230 V a.c. - neutral (N)
21
Supply voltage 230 V a.c. - live (L)
22
Optional connections for safety thermostat
23
Optional connections for safety thermostat
24
M1
Actuator - open
25
M1
Actuator - close
26
M1
Actuator - neutral
27
P1
Circulation pump - neutral
28
P1
Circulation pump - live (relay R1)
29
Not to be used
30
Not to be used
2
Wire cross section: 0.5 - 1.5 mm
Incorrect connection can damage the TRIAC outputs.
VI.KT.F2.02
DH-SMT/DK
Max. load
15 VA
15 VA
4 (2) A
© Danfoss 06/2008
25