Danfoss TP5000 RF Si 설치 지침 매뉴얼 - 페이지 12
{카테고리_이름} Danfoss TP5000 RF Si에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss TP5000 RF Si 14 페이지. 5/2 day programmable electronic room thermostat
Danfoss TP5000 RF Si에 대해서도 마찬가지입니다: 설치 및 사용자 지침 매뉴얼 (14 페이지), 사용자 지침 (2 페이지)
페이지 인쇄
- 1. Installation Instructions
- 2. Product Specification
- 3. Installation
- 4. Commissioning (RF Models Only)
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. User Instructions
- 8. Before You Start
- 9. Setting the Clock & Day
- 10. Running Your Programme
- 11. Before You Change the Preset Programmes
- 12. Changing the Preset Programmes
- 13. User Overrides
- 14. Frost Protection
- 15. Battery Replacement
Running your programme
GB
Press PROG – the colon in the LCD display
will start to fl ash. The heating will now come
on and go off at the programmed times.
User Overrides
Sometimes you may need to change the way you use your heating
temporarily, i.e.due to unusually cold weather. The TP5000 has several
user overrides, which can be selected without affecting the thermostat
programming.
Altering display to show either time or actual room
temperature
Press + and – together to change
between settings.
To temporarily alter the current programmed
temperature
Press
displayed.
This override will automatically cancel at beginning of
next programmed event)
To temporarily use your weekend programme during
the week
Press
This override cancels at 2:00am.
12
or
until required temperature is
(i.e. you have a days holiday or are off sick)
and
together once.
i2 24
20