Danfoss TP5000 RF Si 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} Danfoss TP5000 RF Si에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss TP5000 RF Si 14 페이지. 5/2 day programmable electronic room thermostat
Danfoss TP5000 RF Si에 대해서도 마찬가지입니다: 설치 및 사용자 지침 매뉴얼 (14 페이지), 사용자 지침 (2 페이지)
페이지 인쇄
- 1. Installation Instructions
- 2. Product Specification
- 3. Installation
- 4. Commissioning (RF Models Only)
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. User Instructions
- 8. Before You Start
- 9. Setting the Clock & Day
- 10. Running Your Programme
- 11. Before You Change the Preset Programmes
- 12. Changing the Preset Programmes
- 13. User Overrides
- 14. Frost Protection
- 15. Battery Replacement
Installation
GB
First, remove the wallplate from the back of the unit.
From the top left hand corner of the wallplate, there must be
clearances of at least 140mm to the right, 15mm to the left,
30mm above and 100mm below in order to mount the plug-
in module.
Fix at a height of approximately 1.5m from the fl oor, away
from draughts or heat sources such as radiators, open fi res or
direct sunlight.
Prior to mounting the unit should be set in either ON/OFF or
chrono-proportional control mode (see below).
1) ON/OFF - boiler switches ON when below set temperature
and OFF when above.
4
1) ON/OFF
2) CHRONO