Danfoss APPW 5.1 서비스 매뉴얼 - 페이지 10

{카테고리_이름} Danfoss APPW 5.1에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss APPW 5.1 12 페이지. Disassembling and assembling

Disassembling and Assembling, APP(W) 5.1-10.2

Service guide |

10 | 180R9238 | DKCFN.PI.078.F3.02 | 521B1196

13. Place the guide pin in the casing. Position

the combined flange and swash plate onto

the guide pin and press it gently, by hand,

into the casing.

Ensure not to squeeze the O-ring.

15. Remove the ceramic ring from the seal

retaining ring.

16. Wet the parts with clean filtered water.

12. Remove the old O-ring and fit the

new O-ring on the adapter.

Guide pin

14. Screw the 8 screws into the flange and

the casing. To prevent cold welding,

lubricate the threads on the 8 screws

with grease, screw them into the pump

and tighten by hand. Use Molykote® D

paste from Dow Corning or Klüber UH1

84-201 from Klüber lubrication.