Danfoss PAHT G Series 지침 - 페이지 9

{카테고리_이름} Danfoss PAHT G Series에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss PAHT G Series 20 페이지. Paht and paht g 256-308 disassembling and assembling
Danfoss PAHT G Series에 대해서도 마찬가지입니다: 서비스 매뉴얼 (20 페이지), 분해 및 조립 지침 (20 페이지)

페이지 인쇄
Danfoss PAHT G Series 지침
Instruction
Disassembling and assembling PAHT and PAHT G 256-308
Shaft seal
18. Place pump horizontally to get access to
shaft.
20. Use plastic assembly tool provided with
large diameter pointing downwards, to
press seal home against shoulder of stop
for shaft seal.
22. Remove old O-ring and fit new one on
shaft seal flange.
180R9268 / 521B1236 / DKCFN.PI.011.B3.02 / 01.2015
19. Place stop for shaft seal on shaft.
WARNING:
Ensure that carbon ring is pointing
outwards.
21. Press new ceramic ring into retainer ring
by using plastic tool provided.
WARNING:
Ensure that the face with rubber seal is
positioned against shoulder in shaft
seal flange.
23. Place shaft seal flange on shaft. Tighten
the bolts with a torque of 10Nm +/-2 Nm.
9