Dunster House HANGOVER APEX G4-1824HAB 설치 매뉴얼 - 페이지 18

{카테고리_이름} Dunster House HANGOVER APEX G4-1824HAB에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunster House HANGOVER APEX G4-1824HAB 18 페이지. Bar 1.8m x 2.4m (6ft x 8ft)

페이지 인쇄

G4 - 1824HAB HANGOVER APEX BAR 1.8m x 2.4m - Assembly Steps

STEP 10: PANEL JOINT RIM & DRIPTRAY

Items:

10x 35mm Screws

1x ST-PT15501855.Z

1x ST-PT2023800 (Driptray)

NOTE:

The layout of your doors can be changed by installing

the relevant Panels on the opposite side of your

Hangover Bar.

•

Fix 1x ST-PT15501855.Z over the joint ensuring

the distance between the joint and edge of the trim

is the same.

•

Use 8x 35mm Screw.

Side View

Shiplap

Drip tray

35mm SCREW

** Pre-drill parts before fixing screws **

SCREW 35 mm

Principle of drip tray installation

Position the drip tray to the correct position as shown in the diagram

•

below. Keep same overhang of drip tray on each side of the door.

Fix the drip tray into the front wall frame (represented by dashed

•

Front panel frame

lines) by using 2x 35mm screws.

Drip tray

Approx. 60mm

CONGRATULATIONS ON YOUR NEW HANGOVER BAR!!

Front View

35mm SCREW

ST-PT15501855.Z

Page 18