Danieli Automation ID2202 설치, 사용 및 유지 관리 매뉴얼 - 페이지 4
{카테고리_이름} Danieli Automation ID2202에 대한 설치, 사용 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danieli Automation ID2202 20 페이지. Infrared photodetector
페이지 인쇄
Danieli Automation – ID2202
3
DESCRIPTION
3.1
E
XTERNAL APPEARANCE
The container of photodetector ID2202 (1), made of pressure-cast aluminium, is equipped with a semi-
circular support plate (2) that allows its fastening and orientation on the vertical plane within an angle of
about 30° , and incorporates a circuit for liquid co oling (3), to be supplied with water or other
refrigeration fluids based upon the working environmental conditions.
There is an optical window (4) on the front side through which the IR sensor inside the HMD "observes"
the material to detect.
A green LED, that is inside the HMD, can be seen through the optical window.
On the rear side of the photodetector there are the following connection and signalling devices:
bayonet connector, 6 contacts, directive MIL-C-5015 (5)
two-colour red/green LED (6)
potentiometer to adjust sensitivity (7)
1/4" GAS threads to supply and drain the cooling circuit (8).
26
Certified by OneDoc A.620.107 Rev.04-MU 27/145 #1061394
Danieli Automation Standard - Installation Use and Maintenance Manual - ID2202
2. Exterior appearance
3. Rear view