Audiophile APS PurePower 1050 사용자 설명서 - 페이지 8

{카테고리_이름} Audiophile APS PurePower 1050에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiophile APS PurePower 1050 19 페이지. 120 volt models audio power supply

페이지 인쇄

1. About the Purepower Aps

Rack-Mount

The APS can be installed in 19 or 23-inch racks and needs only 2U of rack space. Mounting rails

or a rack shelf are required for your Audiophile APS. If rails are not already installed in your rack

or included with your APS, contact your PurePower dealer.

Use the following procedure to install the APS in a rack:

· Place the APS on a flat, stable surface with the front of the APS facing toward you.

· Attach the mounting handles to the bracket with the screws provided in the accessory kit.

· Remove the screws attaching the front bezel from one side of the unit. Align the rack

mounting brackets with the screw holes on the side of the APS and replace screws.

· Repeat for the opposite side.

If installing optional PowerPacks, repeat Steps 1 through 4 for each cabinet.

NOTE The PowerPacks must be installed BELOW the APS.

Slide the APS and any optional PowerPacks into the rack. Continue to "Installing the APS" to

complete the installation.

Audiophile Power Supply • www.audiophileaps.com

Installation

| 07