Consort CRXSL-05 설치 및 사용자 설명서 - 페이지 6

{카테고리_이름} Consort CRXSL-05에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Consort CRXSL-05 6 페이지. Single zone wireless controller

23. Setup menu
1.
To access the setup menu, press and hold
together for 5 seconds.
In the menu, settings are numbered 1 to 14. This
setting number is displayed on the left and the
value of the setting is displayed on the right.
2.
Use
to go to the next setting.
3.
Use
and
to change the value.
4.
Press
to save and exit setup.
01 - temperature calibration
The temperature reading has been factory calibrated
but if for any reason it needs adjusting (power
adapter compensation, better accuracy required, to
suit different position in the room etc.) the reading
can be recalibrated in 0.5 degrees steps.
02 - change between degrees Celsius or Fahrenheit.
03 - set minimum temperature
(- - - = heating OFF, 4°C = frost protection)
04 - set maximum temperature
05 - information about the software version
06 - 0 = Simplified automatic mode (factory default)
1 = Automatic mode
2 = Manual control mode
07 - open window detection 0 = off, 1 = on
08 - 600 - open window detection time 600 seconds
09 - 2°C - temperature drop of 2°C in the detection time
10 - 30 - closed window detection time of 30 seconds
11 - 2°C - temperature rise of 2°C in the detection time
12 - Reset: Press
and wait 10 seconds for full reset to
factory settings
13 - Programme time setting
5d2 = weekday and weekend settings
24h = every day uses same programme
7d = 7 unique day settings
14 - RXREC compatibility mode 0 = off, 1 = on
Customer Helpline
The CRXSL is guaranteed for one year against faulty material or workmanship. This applies only if the appliance has
been used for purposes in accordance with the instructions provided and has not been misused, neglected,
damaged, modified or repaired by any person not authorised by us. This guarantee is offered to you as an extra
benefit and does not affect your legal rights.
Reasonable care has been taken to ensure that this guide is accurate at the time of printing. In the interest of
progress, the Company reserve the right to vary specifications from time to time without notice.
Should you need any advice on the use of you new Consort product please contact our Helpline:
Operation hours: Mon to Thu 8.30am to 4.30pm | Fri 8.30am to 3.30pm
I3984133 Iss 05
Consort Equipment Products Limited
Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Tel: 01646 692172 | Fax: 01646 695195
BS EN ISO 9001 Registered Company No FM12671
24. Simplified Automatic Mode
and
As shown on the setup menu in the previous section, the
CRXSL has two different automatic modes. These are simpli-
fied automatic mode and automatic mode.
In automatic mode, all information can be seen at all times.
This information includes the room temperature, target tem-
perature, the time, day, operating mode etc.
Having all this information available is useful, however it can
be overwhelming. This is what simplified mode is for. In simpli-
fied mode, the CRXSL will only display information essential to
the usage of the controller.
By default, the CRXSL will be in simplified automatic mode.
Web: www.consortepl.com
6