Constellation audio Inspiration PREAMP 1.0 사용자 설명서 - 페이지 6

{카테고리_이름} Constellation audio Inspiration PREAMP 1.0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Constellation audio Inspiration PREAMP 1.0 16 페이지.
Constellation audio Inspiration PREAMP 1.0에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Connections

1. BAL input

Use this XLR balanced input for connection to balanced-

output preamps of other brands. To select this input, set

the input switch to BAL (upper position). To remove the

XLR plug, push on the tab above the jack and pull the plug

out.

2. DIRECT input

Use this XLR balanced input only for connection to the

Constellation Audio Inspiration PREAMP 1.0 or Virgo or

Altair preamp. This connection is for Constellation Direct—

an audio interface that is, in essence, perfectly balanced.

The positive- and negative-going halves of the signal will

exhibit near-zero difference except for their polarity. To

select this input, set the input switch to DIRECT (middle

position). To remove the XLR plug, push on the tab above

the jack and pull the plug out.

Inspiration MONO 1.0 input jack layout

3. RCA input

This input is provided as a convenience. You can use it if you elect to feed the amplifier with an unbalanced

signal source. To select this input, set the input switch to RCA (lower position). However, to get the best

performance from the Inspiration amplifiers, you must use an XLR input.

Inspiration STEREO 1.0 input jack layout