Contemporary Research ICC1-IRX 제품 설명서 - 페이지 4
{카테고리_이름} Contemporary Research ICC1-IRX에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contemporary Research ICC1-IRX 19 페이지. Ir tv controller, 1-way rf coax control
페이지 인쇄
Specifications
Physical
Size:
Weight:
Enclosure:
Mounting:
Rear Panel
RF In
RF Out:
Net LED:
IR Out:
IR Out LED:
Power Sensor:
Power Sensor LED:
Power In:
DIP Switches:
iCC-Net
Operation:
Data Receive:
Includes
CC-IRE IR Emitter
RF Loop cable, 18"
12 VDC power supply, 500 mA
Mounting Velcro for unit and CC-HSD
Options
Xantech CSM1 Power Current Sensor
CC-USB USB Sensing Cable (upcoming)
CC-HSD Scan Sensor
Contemporary Research
5.5" [140mm] wide x 1.1" [28mm] height x 3.4" [86mm] deep
8 oz [226g]
All aluminum with durable black powder coat paint
Mounts rear of TV
'F', female, 75 ohm impedance, RF from CATV system, iCC-Net control
'F', female, 75 ohm impedance, RF to TV, less than -1.5 dBmV loss
Green LED for iC-Net bus and DC power, flashes once per second if active
3.5mm jack for CC-IRE IR Emitter cable or compatible CC-IRS serial cable
Supports carrier frequencies up to 62 KHz
Shipped with CC-IRE cable, 10 foot with stick-on IR emitter
Red LED lights when sending IR commands
TIP+: 3.5mm jack for optional CC-HSD scan sensor
Also acts as logic level input, switch to GND to signal power on
CSM1: 3.5mm jack for power and data from CSM1 power current sensor
Red LED lights when sensor indicates power on
2.1mm coaxial jack (inside center conductor positive), 75 Ma maximum
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
North American version includes UL/CSA listed wall power supply
S1 and S2, located on bottom of unit, sets IR code operation and device number
1-way control, carried over the same RF coax connection as TV channels
Mid-band VHF, 74.7MHz, sent from ICC-HE
-25 to +35 dBmV signal level
4
ICC1-IRX