4IPNET EAP210 빠른 설치 매뉴얼 - 페이지 7
{카테고리_이름} 4IPNET EAP210에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP210 15 페이지. Enterprise access point
4IPNET EAP210에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
1 Antenna
Connector
2 12V
2A
3 Uplink Port
4 WES Button
5 Restart Button
6 LED Indicators
7 Console Port
Right-Side Panel
On the right side of the panel there is a Kensington slot. Admin can also fill it with a rubber plug.
Copyright © 4IPNET, INC. All rights reserved.
Reverse SMA connectors for attaching antennas.
1 (1) is the primary antenna connector and 1 (2) is the secondary.
Utilize both connectors for 802.11n MIMO optimized performance.
Power Socket for the power adaptor.
The port for uplink connection to another gateway or device. PoE (802.3af/at) is supported.
WDS Easy Setup. Press the button to build up a WDS link with another peer. 4 WDS links
can be set up.
Press to restart the system
Power
On indicates power on.
On indicates the system is ready.
Status
WLAN
On indicates wireless network interface is ready for service.
WES
For indicating WDS connection status.
WES Start
WES Negotiate
WES Success
WES Fail/Timeout
To access EAP210 via the console interface
EAP210 Enterprise Access Point
Master (Press for more than
3 seconds)
LED (Green) OFF and then
BLINKING SLOWLY
BLINKING SLOWLY
(Green)
LED (Green) ON
LED (Green) OFF
3
Quick Installation Guide
ENGLISH
Slave (Press once and
then release right away)
LED (Green) BLINKS
SLOWLY
BLINKING RAPIDLY
(Green)
LED (Green) ON
LED (Green) OFF