4IPNET EAP210 빠른 설치 매뉴얼 - 페이지 9
{카테고리_이름} 4IPNET EAP210에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP210 15 페이지. Enterprise access point
4IPNET EAP210에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
Getting Started
4ipnet EAP210 supports web-based configuration. When hardware installation is complete, EAP210 can be
configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0
and above.
The default values of LAN IP address and subnet mask of EAP210 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Steps:
1. To access the Web Management Interface, connect the administrator PC to the LAN port of EAP210 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP210 in TCP/IP of your
PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of EAP210 (http://192.168.1.1) at the
address field, and then press Enter.
3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,
and then click Login.
Copyright © 4IPNET, INC. All rights reserved.
Administrator Login Page
5
Quick Installation Guide
EAP210 Enterprise Access Point
ENGLISH